ZyXEL Communications RGS Series User Manual page 163

The QCE page includes the following fields:
Object
Port Members
Key parameters
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the QCE listings.
Check the checkbox button to include the port in the QCL entry. By default all ports
are included.
Key configuration is described as below:
DMAC Destination MAC address: Possible values are 'Unicast', 'Multicast',
'Broadcast' or 'Any'.
SMAC Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'. If a port is configured to
match on DMAC/DIP, this field is the Destination MAC address.
Tag Value of Tag field can be 'Untagged', 'Tagged' or 'Any'.
VID Valid value of VLAN ID can be any value in the range 1-4095 or 'Any'; user can
enter either a specific value or a range of VIDs.
PCP Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5, 6-7,
0-3, 4-7) or 'Any'.
DEI Valid value of DEI can be '0', '1' or 'Any'.
Frame Type Frame Type can have any of the following values:
Any: Allow all types of frames.
EtherType: Ether Type Valid Ether Type can be 0x600-0xFFFF excluding
0x800(IPv4) and 0x86DD(IPv6) or 'Any'.
LLC: SSAP Address Valid SSAP (Source Service Access Point) can vary from 0x00
to 0xFF or 'Any'.
DSAP Address Valid DSAP (Destination Service Access Point) can vary from 0x00 to
0xFF or 'Any'.
Control Valid Control field can vary from 0x00 to 0xFF or 'Any'.
SNAP: PID Valid PID (a.k.a Ether Type) can be 0x0000-0xFFFF or 'Any'.
Description
163