Tacacs - ZyXEL Communications RGS Series User Manual

5.3.40 TACACS+

This page allows you to configure the
Object
Global Configuration
Timeout
Deadtime
Key
Server Configuration
Delete
Hostname
Port
Timeout
Key
TACACS+ servers.
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a
TACACS+ server before it is considered to be dead.
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period
during which the switch will not send new requests to a server that has failed to
respond to a previous request. This will stop the switch from continually trying to
contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only
if more than one server has been configured.
The secret key - up to 63 characters long - shared between the TACACS+ server and
the switch.
To delete a TACACS+ server entry, check this box. The entry will be deleted during
the next Save.
The IP address or hostname of the TACACS+ server.
The TCP port to use on the TACACS+ server for authentication.
This optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
This optional setting overrides the global key. Leaving it blank will use the global key.
Description
99