Storm Control - ZyXEL Communications RGS Series User Manual

5.3.77 Storm Control

Storm control for the switch is configured on this page.
There is a unicast storm rate control, multicast storm rate control, and a broadcast storm rate control. These
only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.
The configuration indicates the permitted packet rate for unicast, multicast or broadcast traffic across the switch.
Object
Frame Type
Enable
Rate
The settings in a particular row apply to the frame type listed here: Unicast, Multicast
or Broadcast.
Enable or disable the storm control status for the given frame type.
The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128,
256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K.
Buttons
Click to apply changes.
Click to undo any changes made locally and revert to previously saved values.
Description
165