5.3.81
RingV2
This page provides Ring related configuration.
Object
Index
Mode
Role
170
The group index. This parameter is used for easy identifying the ring when user
configures it.
Group 1 (Index 1) - It supports configuration of ring.
Group 2 (Index 2) - It supports configuration of ring, coupling and dual-homing.
Group 3 (Index 3) - It supports configuration of chain and balancing-chain.
Enable Ring on the specific group.
When Group 1 or 2 is enabled, all configuration of Group 3 will be reset to default.
Group 3 all configuration options will be locked.
To configure Group 3, both Group1 and 2 should be disabled first. When Group 3 is
enabled, all configuration of Group1 and 2 will be reset to default. Group 1 and 2 all
configuration options will be locked.
Configure the Ring group on this switch as specific role.
Group 1 - support option of ring-master and ring-slave.
# Ring - it could be master or slave.
Group 2 - support configuration of the ring, coupling and dual-homing.
# Ring
# Coupling - it could be primary and backup.
# Dual-Homing
Group 3 - support configuration of the chain and balancing-chain.
# Chain
Description
- it could be master or slave.
- it could be head, tail or member.