Vlans - ZyXEL Communications RGS Series User Manual

VLAN ID
MAC Address
Port Members
Adding a New Static
Entry

5.3.64 VLANs

This page allows for controlling
The page is divided into a global section and a per-port configuration section.
Object
Global VLAN Configuration
Allowed Access VLANs
Ethertype for Custom
S-ports
Port VLAN Configuration
Port
142
The VLAN ID of the entry.
The MAC address of the entry.
Checkmarks indicate which ports are members of the entry. Check or uncheck as
needed to modify the entry.
Click
the VLAN ID, MAC address, and port members for the new entry. Click "Save".
Buttons
Click to apply changes.
Click to undo any changes made locally and revert to previously saved values.
VLAN configuration on the switch.
This field shows the allowed Access VLANs, i.e. it only affects ports configured as
Access ports. Ports in other modes are members of all VLANs specified in the
Allowed VLANs field. By default, only VLAN 1 is enabled. More VLANs may be
created by using a list syntax where the individual elements are separated by
commas. Ranges are specified with a dash separating the lower and upper bound.
The following example will create VLANs 1, 10, 11, 12, 13, 200, and 300:
1,10-13,200,300. Spaces are allowed in between the delimiters.
This field specifies the ethertype/TPID (specified in hexadecimal) used for Custom
S-ports. The setting is in force for all ports whose
This is the logical port number of this row.
to add a new entry to the static MAC table. Specify
Description
Port Type is set to S-Custom-Port.