Qcl Status - ZyXEL Communications RGS Series User Manual

5.4.11 QCL Status

This page shows the QCL status by different QCL users. Each row describes the
conflict if a specific QCE is not applied to the hardware due to hardware limitations. The maximum number of
QCEs is 256 on each switch.
Object
User
QCE
Port
Frame Type
Action
Conflict
182
Indicates the QCL user.
Indicates the QCE id.
Indicates the list of ports configured with the QCE.
Indicates the type of frame. Possible values are:
Any: Match any frame type.
Ethernet: Match EtherType frames.
LLC: Match (LLC) frames.
SNAP: Match (SNAP) frames.
IPv4: Match IPv4 frames.
IPv6: Match IPv6 frames
Indicates the classification action taken on ingress frame if parameters configured are
matched with the frame's content.
Possible actions are:
CoS: Classify Class of Service.
DPL: Classify Drop Precedence
DSCP: Classify DSCP value.
Displays Conflict status of QCL entries. As H/W resources are shared by multiple
applications. It may happen that resources required to add a QCE may not be
available, in that case it shows conflict status as 'Yes', otherwise it is always 'No'.
Please note that conflict can be resolved by releasing the H/W resources required to
add QCL entry on pressing 'Resolve Conflict' button.
Buttons
Select the QCL status from this drop down list.
Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Click to release the resources required to add QCL entry, in case the conflict status
for any QCL entry is 'yes'.
Click to refresh the page.
Description
Level.
QCE that is defined. It is a