Qcl Status - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.14.11 QCL Status

Use the QCL Status sub-menu to get an overview of the status of all QCEs used across the device.
To show the QoS Control List Status
1. Click Configuration >
2. Select the part of the device that uses this QCL from the QCL User drop-down box.
Parameter description
User:

This field shows the QCE user.
QCE#:

This field shows the QCE number.
Frame Type:

This field shows which Ethernet frame type matches this QCE. Possible values are:
Any: The QCE matches any frame type.

Ethernet Type: The QCE matches Ethernet frames with EtherTypes of 0x0600 to 0xFFFF.

LLC: The QCE matches LLC frames.

SNAP: The QCE matches SNAP frames.

IPv4: The QCE matches any IPv4 packets.

IPv6: The QCE matches any IPv6 packets.

Port:

This field shows the list of ports that match this QCE.
Action:

This group of fields shows the classification action taken on ingress frames if the QCE is triggered.
Class: This shows which queue frames are put in if this QCE is triggered.

DP: This shows which drop precedence level is set if this QCE is triggered.

MGS3600-24F/XGS3600-26F/XGS3600-28F
QoS > QCL Status.
7-114 U ' G
SER S UIDE