Configuring The Wireless Network - Kyocera ECOSYS P7240cdn Operation Manual

Installing and Setting up the Machine > Network Setup

Configuring the Wireless Network

When the Wireless Network Interface Kit (IB-36 and IB-51) is installed on the machine and the connection settings are
configured, it is possible to print or send in a wireless network (wireless LAN) environment.
Wireless Network Interface Kit (IB-36) (page 11-7)
IB-51 "Wireless Network Interface Kit" (page 11-5)
The configuration methods are as follows:
Configuration Method
Configuring the Connection
from the Operation Panel
on This Machine
Setting the Connection by
Using the Wi-Fi Setup Tool
Configuring Connections
on the Web Page
Setting the Connection by
Using the Setup Utility of
IB-51
NOTE
When you want to switch to the network interface other than Wired (default) after installing an optional Network
Interface Kit (IB-50) and a Wireless Network Interface Kit (IB-36 or IB-51), select the desired setting on "Primary
Network (Client)".
Primary Network (page 8-21)
Setting the Connection by Using the Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or handheld device
with the machine locally. The connection methods are wired connection via LAN cable and wireless LAN connection (Wi-
Fi Direct).
NOTE
• Before using the Wi-Fi Setup Tool, connect your computer to this machine locally with wired LAN cable or Wi-Fi
Direct.
• To use Wi-Fi Direct, confirm that the Wi-Fi Direct is enabled (Wi-Fi Direct is set to [On]) and Restart Network from
the operation panel, before your computer will be connected to this machine with Wi-Fi Direct.
• To use a wired LAN cable directly connected to the machine, the Auto-IP (Link-local) address will be assigned to the
machine and the computer. This machine applies Auto-IP as the default settings.
• Configure the settings on the operation panel if your computer supports WPS.
Wi-Fi Settings (page 8-13)
Description
Use Wi-Fi Settings or Wireless Network to configure
the network in details from System menu.
This is the tool included in the Product Library. You
can configure the connection according to the
instructions provided by the wizard.
For the IB-36, the connection can be set from the
Command Center RX.
For the IB-51, the connection can be set on the
dedicated Web page.
This is the setup tool included in the CD of IB-51. You
can use it on both Windows and Mac OS.
2-18
Reference Page
Wi-Fi Settings (page 8-13)
Setting the Connection by
Using the Wi-Fi Setup Tool
(page 2-18)
Command Center RX User
Guide
IB-51 Operation Guide
IB-51 Operation Guide