Troubleshooting > Troubleshooting
Message
Cannot execute this job.
Restricted by
Authentication settings.
Check cassette #.
Close rear cover #.
Close the waste toner
cover.
Close top cover.
Color toner is empty.
Cannot print this
document.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-29)
E
Message
Error occurred.
Turn the power switch
off and on.
H
Message
High temperature.
Adjust room temp.
I
Message
Incorrect account ID.
*1
Press [OK].
Incorrect ID.
Checkpoints
―
―
Is there any cover which is open?
―
Checkpoints
―
Checkpoints
—
Checkpoints
―
―
―
10-14
Corrective Actions
This job is canceled because it is
restricted by Authentication
settings. Select [OK].
Open and then close the indicated
cassette.
Close the cover indicated on the
screen.
Replace the toner container using a
new toner kit for the particular color.
Corrective Actions
System error has occurred. Turn the
main power switch OFF and then
ON.
Corrective Actions
Adjust the temperature and the
humidity of your room.
Corrective Actions
The account ID was incorrect when
processing the job externally. The
job is canceled. Select [OK].
The administrator ID entered to
open the Security function or Job
Accounting menu is not correct.
Enter the correct administrator ID.
The user ID entered for a private job
is not correct. Check the user ID
that you specified on the printer
driver.
Reference
Page
―
―
―
page 10-3
Reference
Page
―
Reference
Page
―
Reference
Page
page 9-17
―
page 4-9
page 4-11