Using Job Accounting; Login/Logout - Kyocera ECOSYS P7240cdn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting

Using Job Accounting

This section explains procedures while setting job accounting.

Login/Logout

If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Use the procedure below to login and logout.
Login
Logout
When the operations are complete, select the [Logout] key to return to the account ID entry screen.
1
In the account ID entry screen, enter the account ID using the numeric keys and select the
[OK] key.
NOTE
• If you entered a wrong character, select the [Clear] key and enter the account ID
again.
• If the entered account ID does not match the registered ID, a warning beep will sound
and login will fail. Enter the correct account ID.
When the screen to enter the login user name and password appears
If user login administration is enabled, the screen to enter the login user name and password
appears. Enter a login user name and password to login.
Adding a User (Local User List) (page 9-5)
2
Proceed to complete the rest of the steps.
9-26