Kyocera ECOSYS P7240cdn Operation Manual page 163

Setup and Registration (System Menu) > System Menu
Item
REST over SSL
Off/On
Port Number
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
*1 The setting will be changed after restarting the device or network.
*2 This function is displayed when the optional Wireless Network Interface Kit is installed.
*3 Set "SSL" to [On] in SSL Setting.
SSL Setting (page 8-31)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Primary Network
[Menu] key > [▲] [▼] key > [Network] > [OK] key > [▲] [▼] key > [Primary Network] > [OK] key
NOTE
This function is displayed when the optional Network Interface Kit (IB-50) or Wireless Network Interface Kit (IB-51 or
IB-36) is installed.
Item
Primary Network
Ping
[Menu] key > [▲] [▼] key > [Network] > [OK] key > [▲] [▼] key > [Ping] > [OK] key
Item
Ping
-
Select whether to use REST secured by SSL.
Value: Off, On
NOTE
• This function is displayed when [Off/On] is set to [On].
• When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Specifies the port number used. The default port number is 9081.
Value: 1 to 32767
NOTE
This function is displayed when [Off/On] is set to [On].
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Specify the network to be used for the send function, the network authentication and
connecting to external address book.
Value: Wi-Fi, Wired Network, Optional Network
Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
8-21
Description
*1, *3
*1
Description
Description