Kyocera ECOSYS P7240cdn Operation Manual page 54

Installing and Setting up the Machine > Network Setup
6
7
8
9
NOTE
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "Welcome to the Found New Hardware Wizard" dialog box displays, select
[Cancel].
• If the autorun screen is displayed, click [Run setup.exe].
• If the user account management window appears, click [Yes] ([Allow]).
Display the screen.
1
Select [Maintenance].
[Wi-Fi Setup Tool] > [OK]
Configure the settings.
1
[Do not use automatic configuration] > [Next] > [Next]
2
[Wi-Fi Direct] > [Next] > [Next]
3
[Advanced setup] > [Next]
Select [Express] or [Custom] as device discovery method and specify the IP address or
host name to search the machine.
4
Select the machine > [Next]
5
Select [Use the device settings.] on [Authentication mode], and enter the login user
name and password. Login user name and Password are both Admin.
6
Configure the communication settings > [Next]
7
Change the settings of access point as necessary > [Next]
The network is configured.
2
1
2
2-21
1 Click [View License Agreement]
and read the License Agreement.
2 Click [Accept].