Kyocera ECOSYS P7240cdn Operation Manual page 148

Setup and Registration (System Menu) > System Menu
Item
Font List
RAM File List
SSD File List
SD Card FileList
DataSanitization
Job Log History
[Menu] key > [▲] [▼] key > [Report] > [OK] key > [▲] [▼] key > [Job Log History] > [OK] key
Item
Send History
Auto Sending
Destination
Subject
Personal Info.
Prints the font list, allowing you to check the font samples installed in the machine.
You can print a list of the files in the RAM disk.
NOTE
This setting is displayed when [RAM Disk Mode] is set to [On].
You can print a list of the files in the SSD.
NOTE
Displayed when the optional SSD is installed.
You can print a list of the files in the SD Card.
NOTE
Displayed when the optional SD Card is installed.
You can print a Data Sanitization Report.
You can also send the log history to the specified destinations manually.
This function automatically sends the log history to the specified destinations whenever a set
number of jobs has been logged.
Value
Off/On: Off, On
Jobs: Set the number of jobs at which the job history is automatically sent. The setting
range is 1 to 100.
This setting is displayed when [Off/On] is set to [On].
Set and check the destination to which log histories are sent.
Value
Confirmation: Check the destination to which log histories are sent.
Address Entry: Set the destination to which log histories are sent. Only E-mail address
can be set.
Set the subject automatically entered when sending log histories by E-mail.
Value: Up to 60 characters
Select whether to include personal information in the job log.
Value: Include, Exclude
Description
Description
8-6