Kyocera ECOSYS P7240cdn Operation Manual page 165

Setup and Registration (System Menu) > System Menu
Item
Custom Setup
Netwk Name(SSID)
Connection Mode
Channel
Netwk Authentic.
Encryption
Data Encryption
WEP Key
Preshared Key
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Netwk Authentic.".
*3 Displayed if you selected [WPA-PSK] or [WPA2-PSK] for "Netwk Authentic.".
The detailed settings for wireless LAN can be changed. You can check the connection with a
wireless network by selecting [Connect].
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
NOTE
Up to 32 characters can be entered.
Set the connection mode.
Value: Ad Hoc, Infrastructure
NOTE
Ad Hoc: Directly communicates with the device without going through an access point. This
method cannot be used to connect to two or more devices.
Infrastructure: Performs communication through an access point.
Set channel. Use [▲] or [▼] or the numeric keys to enter a number.
Value: 1 to 11
Select network authentication type. To select other options, open the device home page from a
computer.
Value: Open, Shared, WPA-PSK
Select encryption settings. The setting values vary depending on the "Netwk Authentic."
setting.
Set the encryption method.
When "Netwk Authentic." is set to [Open] or [Shared]:
Value: Disable, WEP
When "Netwk Authentic." is set to [WPA-PSK] or [WPA2-PSK]:
*2
Value: TKIP , AES, Auto
Register the WEP key. Select [Edit] and Enter the WEP Key using the numeric keys.
NOTE
Up to 26 characters can be entered.
Character Entry Method (page 11-10)
*3
Register the Preshared Key. Select [Edit] and Enter the Preshared Key using the numeric
keys.
NOTE
The number of characters is between 8 and 64.
Character Entry Method (page 11-10)
Description
*1 *1
, WPA2-PSK
*2
8-23