Kyocera ECOSYS P7240cdn Operation Manual page 171

Setup and Registration (System Menu) > System Menu
Item
Power Off Rule (models for
Europe)
Power Off Timer (models for
Europe)
WeeklyTimer Set.
Weekly Timer
Schedule
Retry Settings
Limited Retries
Retry Times
Retry Interval
Auto Err. Clear
Err. Clear Timer
Select whether or not the machine enters Power Off mode for the following function.
Select [On] to set the Power Off mode.
• Network
• USB Cable
• USB Host
• RAM Disk
*2
• NIC
Value: Off, On
NOTE
Even when any of the functions is set to [On], if [NIC] is set to [Off], the machine does not enter
Power Off Mode.
Even when [Network] or [USB Cable] is set to [Off], if the machine does not communicate with
the other devices, the machine will enter Power Off Mode.
Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,
2 days, 3 days, 4 days, 5 days, 6 days, 1 week
Configure settings for switching the machine to OFF and waking it automatically at a specified
time for each day of the week.
Select whether to use Weekly Timer.
Value: Off, On
Specify the time for each day of the week at which the machine turns OFF.
-
Set whether or not retry of machine power-off is performed.
Value: Off, On
Set the number of retries for turning OFF this machine.
Value: 0 to 10 times
NOTE
This function is displayed when [Limited Retries] is set to [On].
Set the retry interval.
Value: 10 to 60 seconds (increments of 10 seconds)
If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Err. Clear] is set to [On].
8-29
Description