Kyocera ECOSYS P7240cdn Operation Manual page 160

Setup and Registration (System Menu) > System Menu
Item
IPP
Off/On
Port Number
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
IPP Over SSL
Off/On
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
HTTP
Off/On
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
-
Selects whether to receive documents using IPP. To use the IPP protocol, select [Not Secure
(IPP&IPPS)] on IPP Security under Security Settings from the Command Center RX.
Value: Off, On
Specifies the port number used. The default port number is 631.
Value: 1 to 32767
NOTE
This function is displayed when [Off/On] is set to [On].
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
-
Select whether to use IPP to receive documents secured by SSL.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
-
Select whether to communicate using HTTP.
Value: Off, On
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
8-18
Description
*1
*1, *3
*1
*1