Guide to the Control Panel
Entering Characters
To enter characters and symbols for network settings and register contacts from the control panel, use the
l
r
, and
buttons and the software keyboard on the LCD screen. Press the
character or function button on the keyboard, and then press the OK button. When you have finished entering
characters, select OK, and then press the OK button.
Function button
l r
A 1 #
OK
Viewing Animations
You can view animations of operating instructions such as loading paper or removing jammed paper on the LCD
screen.
>
Viewing Animations
The printer is not connected to a wireless (Wi-Fi) network.
The printer is searching for SSID, unset IP address, or having a problem with a wireless
(Wi-Fi) network.
The printer is connected to a wireless (Wi-Fi) network.
The number of bars indicates the signal strength of the connection. The more bars
there are, the stronger the connection.
The printer is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP)
mode.
The printer is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
Descriptions
Moves the cursor to the left or right.
Switches the character type. You can enter alphanumerics or symbols.
You can also switch them by using the
Enters a space.
Deletes a character to the left (backspace).
Enters the selected characters.
u
d
,
,
button.
24
u
l
r
, or
button to select a
d
,
,