Epson L5290 Series User Manual page 104

Faxing
>
Sending Faxes Using the Printer
3. Select Fax on the home screen.
To select an item, use the
4. Press the OK button, and then select Scan Settings or Fax Send Settings to make settings such as the
resolution and the sending method if necessary.
5. When you hear a fax tone, press the
Note:
When a number is dialed using the connected telephone, it takes longer to send a fax because the printer performs
scanning and sending simultaneously. While sending the fax, you cannot use the other features.
6. When sending is complete, remove the originals.
Related Information
"Scan Settings" on page 109
&
"Fax Send Settings" on page 109
&
Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
Therefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
Accessing the Menu
You can find the menu on the printer's control panel below.
Fax > Fax Settings > Direct Send.
Sending Faxes in Monochrome at a Specified Time of the Day (Send Fax Later)
You can set to send a fax at a specified time. Only monochrome faxes can be sent when the time to send is
specified.
1. Place the originals.
2. Select Fax on the home screen.
To select an item, use the
3. Specify the recipient.
4. Make settings to send faxes at a specified time.
A
Press the OK button, and then select Fax Send Settings.
B
Select Send Fax Later, and then select On.
C
Enter the time you want to send the fax, and then press the OK button.
>
Various Ways of Sending Faxes
u d l r
buttons, and then press the OK button.
x
button, and then hang up the handset.
u d l r
buttons, and then press the OK button.
104