Epson L5290 Series User Manual page 265

Product Information
documents are printed at their original size on multiple sheets, or a blank second page may be
ejected.
Split Page Settings:
Prints received faxes with the page split when the size of the received documents is larger than the
size of the paper loaded in the printer.
Auto Rotation:
Rotates faxes received as landscape-oriented A5 size documents so that they are printed on A5 size
paper. This setting is applied when the paper size setting for at least one paper source used for
printing faxes is set to A5.
By selecting Off, faxes received as landscape-oriented A5 size, which are the same width as A4
portrait documents, are assumed to be A4 size faxes and printed as such.
Check the paper size setting in Settings > Printer Setup > Paper Source Settings.
Add Reception Information:
Prints reception information on the received fax, even if the sender does not set the header
information. The reception information includes the received date and time, sender's ID, and page
number (such as "P1"). When Split Page Settings is enabled, the split page number is also included.
Print Start Timing:
Select options to start printing the faxes to receive.
❏ All Pages Received: Printing starts after receiving all of the pages. To start printing from the first
page or last page depends on the setting of Collation Stack feature. See the explanation for
Collation Stack.
❏ First Page Received: Starts printing when the first page is received, and then prints in order as the
pages are received. If the printer cannot start printing, such as when it is printing other jobs, the
printer starts printing received pages as a batch when it is available.
Collation Stack:
Since the first page is printed last (output to the top), the printed documents are stacked in the correct
page order. When the printer is running low on memory, this feature may not be available.
Print Suspend Time:
During the time period you specified from Stop through Restart you specified, the printer saves
documents received in the printer's memory without printing them. This feature can be used for
noise prevention at night or to prevent confidential documents from being disclosed while you are
away. Before using this feature, make sure there is enough free memory. When you set this to Off, you
can print the received documents even before the restart time.
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings Menu
You can find the menu on the printer's control panel below:
Settings > Fax Settings > Report Settings
> >
Settings Menu List Fax Settings
265