Done By Authorized Océ Technician - Oce Eco Solvent CS9060 User Manual

5.2 DONE BY AUTHORIZED OCÉ TECHNICIAN
This section describes the periodical part replacement and the periodical inspections required for this printer.
These periodical services ensure the stable printing quality of the printer.
5.2.1 Periodical replacement of parts
Perform periodical replacements according to the table below. These replacements should be executed by
an authorized Océ technician. These replacements are necessary to ensure the best printing quality output.
5.2.2 Periodical inspection part list
Perform periodical inspections according to the table: "Periodical Inspection Part List" and perform cleaning
and part replacement as necessary.
Part
Media guide
Sub platen front surface
Timing fence
(CR encoder detection slit plate)
Rail on the CR guide frame
P_REAR sensor front surface
Part
Maintenance station
Wiper
Damper
Once a year
Once a year
Once a year
Once a year
User's Guide Océ CS9060 printer
Chapter 5: periodical maintenance
Timing
Once a year
Once a year
Once a year
Timing
•
Media dust accumulation
•
Foreign objects
•
Damages
•
Media dust accumulation
•
Foreign objects
•
Damages
•
Foreign objects
•
Media dust accumulation
•
Foreign object
119 AP-75770 – Rev 1.1 -19/11/2007,
Check point