Oce Eco Solvent CS9060 User Manual page 87

4.7.2 Effect menu
Use this menu to improve the print quality by means of intelligent interweaving print algorithms (i²)
Setup Item Setting Value
Fine&Wave 1
Fine&Wave 2
Fine&Wave 3
Effect
Fine&Wave 4
A-S.Fine&Wave
B-S.Fine&Wave
4.7.3 Flushing menu
Setup Item Setting Value
Flushing
The effect function is not used. If obvious white lines or uneven
None 1
print density appear on the printed media in " None1", set it to
None 2
"None2"
The printing joint will be the wave form. It will improve the print
<Wave 1>
quality. If obvious white lines or uneven print density appear on
Wave 2
the printed media in " Wave 1", change the setting to "Wave 2"
This waveform gives a fuzzy joint between the consecutive print
passes improving overall print quality.
Fuzz 1 Set up this menu when obvious white lines or uneven print
Fuzz 2 density appear on printed media in "Wave".
If obvious white lines or uneven print density appear on printed
media in "Fuzz 1" set "Fuzz 2"
Perform printing at a slower speed compared with "Wave" Set
up this menu when you want to improve the print quality
compared with "Wave". If obvious white lines or uneven print
density appear on the printed media in Fine&Wave1, change the
setting to the one with the best print result in "Fine&Wave 1 to 4"
Performs "Wave" printing using one side of the nozzles of the
print head. Since only one side of the nozzles is used, printing
speed becomes half of "Wave1to 4".
Set up this menu when you want to improve the print quality
compared with "Fine&Wave1 to 4"
Performs "Wave" printing using the other side of the nozzles of
"A-S.Fine&Wave" since only one side of the nozzles is used,
printing speed becomes half of "Wave1to4". Set up this menu
when you want to improve the print quality compared with
"Fine&Wave1 to 4"
•
[Enter] key: Save the setting and shift to the previous menu.
•
[Cancel] key: Cancel the setting and shift to the previous
—
menu.
Refer to: Setup menu
Flushing is done in the spitting box.
•
Origin
[Enter] key: Save the setting and shift to the previous
hierarchy.
Flushing is done on the page margins.
•
<On Media>
[Enter] key: Save the setting value and shift to the previous
hierarchy.
Refer to: Flushing return count menu
•
[Cancel] key: Cancel the setting and shift to the previous
— hierarchy.
Refer to: Setup menu
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
Description
Description
87 AP-75770 – Rev 1.1 -19/11/2007,