Error Messages - Oce Eco Solvent CS9060 User Manual

6.4 ERROR MESSAGES

6.4.1 Status messages
This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as below.
No. Display
1 Ready to Print
2 Media End
3 Receiving
4 Converting
5 Printing
6 Warming Up
7 Cleaning **%
8 Start Ink Charge->E
9 Ink Refill **%
10 Washing
11 Moving Origin Pos.
Confirm Position -
12
>E
13 Remove cassettes
14 ** Initialling **
15 ** Press 2sec. **
16 Insert Cleaningcass.
17 Insert ink cassette
18 Media: Type ** OK?
19 Media Initial
20 Cover open
21 Lever up
Description
Standby
(Media is loaded).
Standby
(Media is loaded).
Receiving data.
Analyzing data.
Under printing.
Warming up the heater.
Cleaning the head. Please wait a while.
Ink filling starts.
Press the [Enter] key.
Filling the ink.
Please wait a while.
Washing the print head by Head washing.
Please wait a while.
The print head is moving to the original printing
position in the Origin setup menu.
Please wait a while.
The print head is moving to the original printing
position in the Origin setup menu.
Press the [Enter] key.
Washing the head.
Insert the cleaning cassettes.
Initializing the setting in the Initialization menu. Please
wait a while.
The [Cleaning] key or the [Nozzle Check] key is
pressed for less than 2 seconds.
Press the key for more than 2 seconds again.
Insert the cleaning cassette.
Filling the ink.
Insert an ink cassette.
Initializing the media. Please wait a while.
(**represents the setup media type.)
Initializing the media.
Please wait a while.
(** represents the setup media type)
The front cover or maintenance cover is open
The media loading lever is raised. Set the media
138
User's Guide Océ CS9060 printer
Chapter 6: Troubleshooting
Reference
—
Setting media
—
—
—
—
Head cleaning
Installing ink
cassettes
Installing ink
cassettes
"Panel setup menu"
"Panel setup menu"
"Panel setup menu"
"Panel setup menu"
"Panel setup menu"
Operation panel
Panel setup menu"
Installing ink
cassettes
"Setting media
type"
"setting media
type"
"setting media"
"cleaning the
wiper"
"setting media"
AP-75770 – Rev 1.1 -19/11/2007,