Oce Eco Solvent CS9060 User Manual page 63

Step 12 : Perform Micro adjustment printing.
• Display the Media feed compensation menu on the operation panel.
• Press the [+] key or [–] key to select "PF4: Micro Adj. Print".
• Press the [Enter] key on the operation panel.
The operation panel displays "Printing".
o
Start Micro adjustment printing.
o
Current adjustment value
• After the micro adjustment printing is completed, the operation panel displays "PF4: Micro Adj. Print".
Step 13 : Refer to the illustrations below and check the printing result.
Input the adjustment value
Step 14 : Set up the Micro Adjustment Change.
• Press the [+] key or [–] key to select "PF5: Micro Adj.Change".
• Press the [Enter] key on the operation panel.
o The operation panel displays "Micro: 0pulse".
• Press the [+] key or [–] key and enter the micro adjustment value according to the printing result in
step 16.
• Press the [Enter] key on the operation panel.
o The micro adjustment value is saved.
o The operation panel displays "PF5: Micro Adj.Change".
o The Media feed compensation is complete.
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
2
1
0
1
2
63 AP-75770 – Rev 1.1 -19/11/2007,