Oce Eco Solvent CS9060 User Manual page 94

4.7.18 CR Maintenance menu
Setup Item Setting Value
Start
CR Maintenance
End
4.7.19 Initialization menu
The setting value of the printer is returned to default.
Setup Item Setting Value
ALL
Initialization
MediaType
Except MediaType
4.7.20 Life Times menu
Setup Item Setting Value
Life Times Head
Pump
CR Motor
PF Motor
—
Notes
•
Do not keep using a part which has reached its life span. Problems caused by doing so will not be
covered by the warranty.
Clean the wiper.
•
[Enter] key:
The print head moves to the centre.
The wiper moves forward.
Cleaning the wiper is complete.
•
[Enter] key:
Print head returns to the original position.
The wiper returns to the original position.
•
[Cancel] key: Shift to the previous hierarchy without the wiper
— cleaning operation.
Refer to: Setup menu
All settings return to factory default.
The settings of the MediaType menu are returned to factory default.
The settings other than the MediaType menu are returned to factory
default.
•
[Enter] key:
Display "Initialling" on the operation panel, and initialize the setting.
—
•
[Cancel] key: Shift to the previous hierarchy without initialization.
Refer to: Setup menu
Display the operational life of each part.
•
The operational life of a part is indicated by five asterisks (100 %).
•
As the part deteriorates, the number of asterisks decreases one by
one (20 %).
•
The part should be changed when all of the asterisks have
disappeared, and "Change" is displayed.
•
[Cancel] key: Shift to the previous hierarchy.
Refer to: Setup menu
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
Description
Description
Description
94 AP-75770 – Rev 1.1 -19/11/2007,