Oce Eco Solvent CS9060 User Manual page 108

5.1.5 Head cleaning
When to perform?
Perform a head clean if the prints become blurred or are incomplete.
Notes
•
Remove media while cleaning.
Step 1 : Verify that the operation panel is in Normal mode.
Step 2 : Verify that the media hold lever is lowered
Step 3 : Press the [>] key on the operation panel to select the cleaning mode.
Step 4 : Press the [Cleaning] key on the operation panel for at least 2 seconds.
Result: The operation panel displays "Cleaning **%".
Step 5 : Start the head cleaning.
Notes
•
Pressing the [Cleaning] key again after the 1st head cleaning performs a strong cleaning. If you fail to
remove blurs or incompleteness of printing in one head cleaning, perform a strong cleaning.
•
If you fail to remove blurs or incompleteness of printing with several head cleaning, refer to
Troubleshooting, and perform the adequate process.
User's Guide Océ CS9060 printer
Chapter 5: periodical maintenance
108 AP-75770 – Rev 1.1 -19/11/2007,