Oce Eco Solvent CS9060 User Manual page 32

Step 3 : Install the cleaning cassette into the ink cassette slot.
Keep the ▲ mark facing up and insert the cleaning cassette into the slot of the printer.
o
Insert the cleaning cassette to the end of the
o
•
The printer starts filling cleaning fluid.
Step 4 : "During washing" is displayed on the operation panel and the printer starts head cleaning.
Step 5 : After the head cleaning the display shows "Remove Cartridges"
Step 6 : "Insert InkCartridge" is displayed on the operation panel after the head cleaning.
Step 7 : Take out the ink cassette from the solvent resistant blister and shake it gently 2-3 times.
• Slots for ink cassettes are specified depending on colours of ink cassettes. Match the colour
marked by the side of slot with the colour of the ink cassette.
• Keep the ▲ mark facing up and insert the ink cassette into the slot of the printer.
• Insert the ink cassettes in the printer as follows :
• The ink cassettes must be inserted in a specific slot according to the type and colour used.
• Insert the cassettes with the arrow mark "▲" face-up and pointing to the rear of the printer.
• Insert the cassettes as far as possible.
• Install all four colours.
Notes
•
The CS9060 ink cassettes have been developed in such a way that miss-insertion is not possible. For
each colour, a different design is used, i.e., fins are placed at the outside of each cassette, at different
locations, depending on which colour is used.
1
2
No.
1 Cleaning cassette
2 Cleaning cassette slot
1
2
3
4
5
No.
1 Ink cassette
I
2
nk cassette slot K
3 Ink cassette slot C
4 Ink cassette slot M
5 Ink cassette slot Y
32
User's Guide Océ CS9060 printer
Chapter 3 : Installing the Unit
slot.
Name
Name
AP-75770 – Rev 1.1 -19/11/2007,