Maintenance Services Done By A Service Technician - Oce CS9065 User Manual

7.3 MAINTENANCE SERVICES DONE BY A SERVICE
TECHNICIAN
The maintenance items and their frequency are shown in the table below :
No° Description
1 Changing the dampers
2 Changing the spitting box + tube + L connection
3 Applying grease on the head up-down cams when needed
4 Applying grease on the Y-motor belt if needed
5 Applying grease on the roller path carriage if needed
6 Applying grease on the capping station cam and gears if needed
7 Removing dust in the fan area underneath the print platform
8 Changing the pumps
9 Changing the tubes from the pumps to the waste bottle
10 Changing the capping station
End of the maintenance services done by a technician
190
Chapter 7 : Maintenance
Frequency
Every 6 months
Every 6 months
Every 6 months
Every 6 months
Every 6 months
Every 6 months
Every 6 months
Every 12 months
Every 12 months
Every 12 months
AP-75037, Rev. 1.1, 24/04/2006