Important Safety Instructions - Oce Eco Solvent CS9060 User Manual

1.3 IMPORTANT SAFETY INSTRUCTIONS

In order to use the printer safely, the general notes which must be followed are explained.
Do not install the printer in places where there is a possibility that the printer may be damaged or might
fall by chance. For example:
•
On a shaky stand
•
Slanting location
•
Places where vibration of other machines etc. is transmitted
Do not stand on the printer or do not place heavy things on top of it. The printer may be damaged or
might fall.
Cover the printer with a blanket or cloth like table cloth and do not close the vent. If the vent is closed,
the printer could accumulate heat inside and may cause fire.
Do not install the printer in places where the humidity is high or in a dusty environment. It could lead to
an electric shock and/or fire.
Do not use damaged power cables. It could lead to an electric shock and / or fire.
Do not take out or insert the power plugs with wet hands. This could lead to an electric shock.
Do not connect earth cables in the following areas :
•
Gas pipes. Doing so may cause fire or an explosion.
•
Earth terminals for telephone lines or lightning rods. Doing so may cause a large flow of voltage
if lightning occurs.
•
Water pipes or faucets. If there is a plastic part in the pipe, the grounding will not work correctly.
Do not store combustible materials on the print platform. It could lead to fire when raising the
temperature.
Do not insert or drop metal or objects which are easily combustible through the openings such as fresh
air inlet into the printer. It could lead to an electric shock and fire.
When foreign substances or liquids such as water enter the printer, do not use the printer. It could lead
to an electric shock and / or fire. Immediately switch OFF the power, disconnect the power plugs from
the electric socket, and contact your local Océ representative.
While installing optional items, be sure to Switch OFF the printer and pull out the power plugs. It could
lead to an electric shock.
Wire the various codes (cable) as explained in the User's Guide. Wrong wiring could cause fire.
Be sure to use the power cables supplied with the printer. If other power cables are used, it could cause
an electric shock or fire.
Make sure to use only the specified power supply (AC 100 V - 120 V or AC 220 V - 240 V). If a power
supply other than the specified voltage is used, it could cause an electric shock and fire.
Take power for the printer directly from the power socket (AC 100 V - 120 V or AC 220 V - 240 V). Do
not use complex multiple plugs on the same socket. This could generate heat and might cause fire.
Be sure to use a dedicated power socket with earth wire for the power supply, and connect it to the
earth wire. If the earth wire is not connected, an electric shock or fire may occur.
The waste fluid from the printer is a waste oil (waste ink) of industrial waste. Proper waste fluid disposal
according to industrial waste disposal laws and ordinances of your local governments are required.
Consign disposal of waste fluids to specialized processor.
Symbol Meaning
Indicates 'prohibited' operations.
Indicates required operations.
Important
11
User's Guide Océ CS9060 printer
Chapter 1: Safety Instructions
AP-75770 – Rev 1.1 -19/11/2007,