Oce Eco Solvent CS9060 User Manual page 77

•
Start "Bi-D Quality" pattern printing.
•
Check the BI-D Quality pattern printing and select the number corresponding to the lines that are most
closely aligned.
•
"4" is selected in the next printing sample.
Step 17 : Press the [+] or [–] key to set the number that you have selected.
Step 18 : Press the [Enter] key on the operation panel.
•
The set value for BI-D Quality is registered.
•
"Adjust5 BI-D quality" is displayed on the operation panel.
•
Register the setting for Bi-D Normal (two-way printing/normal mode) in the same way as in previous
steps.
Step 19 : Press the [CANCEL] key on the operation panel to exit from the setup.
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
77 AP-75770 – Rev 1.1 -19/11/2007,