Table 9-7 Ipx Filter Rule Menu Fields - ZyXEL Communications Prestige 681 User Manual

Prestige 681 SDSL Router
The next table describes the IPX Filter Rule.
Field
IPX Packet Type
Destination/Source Network
#
Destination/Source Node #
Destination/Source Socket #
Destination/Source Socket #
Comp
Operation
Once you have completed filling in Menu 21.1.3 - IPX Filter Rule, press [ENTER] at the
message [Press ENTER to Confirm] to save your configuration, or press [Esc] to cancel. This
data will now be displayed on Menu 21.1 - Filter Rules Summary.
9-14
Table 9-7 IPX Filter Rule Menu Fields
Description
Enter the IPX packet type (1-byte in hexadecimal) you wish to
filter.
The popular types are (in hexadecimal):
01 - RIP
04 - SAP
05 - SPX (Sequenced Packet eXchange)
11 - NCP (NetWare Core Protocol)
14 - Novell NetBIOS
Enter the destination/source network numbers (4-byte in
hexadecimal) of the packet that you wish to filter.
Enter in the destination/source node number (6-byte in
hexadecimal) of the packet you wish to filter.
Enter the destination/source socket number (2-byte in
hexadecimal) of the packets that you wish to filter.
Select the comparison you wish to apply to the
destination/source socket in the packet against that specified
above.
This field is applicable only if one of the Socket # fields is
0452 or 0453 indicating SAP and RIP packets. There are
seven options for this field that specify the type of the packet.
None.
RIP Request.
RIP Response.
SAP Request.
SAP Response.
SAP Get Nearest Server Request.
SAP Get Nearest Server Response
Filter Configuration