General Ethernet Setup; Protocol Dependent Ethernet Setup; Figure 2-9 Menu 3.1 - General Ethernet Setup - ZyXEL Communications Prestige 681 User Manual

2.11.1 General Ethernet Setup

This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom
need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic
and prevent security breaches.
Figure 2-9
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu
to define the filter sets.

2.12 Protocol Dependent Ethernet Setup

Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as
outlined below.
For TCP/IP Ethernet setup refer to Chapter 4: Internet Access.
For Novell IPX Ethernet setup refer to Section 7.3 - IPX Ethernet Setup in Chapter 7: IPX
Configuration.
For bridging Ethernet setup refer to Chapter 8: Bridging Setup
Installation & Setup
Prestige 681 SDSL Router
Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
3. Novell IPX Setup
4. Bridge Setup
Figure 2-8 Menu 3 - Ethernet Setup
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 3.1 - General Ethernet Setup
2-11