Figure 2-2 Prestige 681 Rear Panel Connections - ZyXEL Communications Prestige 681 User Manual

Prestige 681 SDSL Router
Figure 2-2
Step 1. Grounding the Prestige
Ground the Prestige by connecting a grounded wire to the F.G. (Frame Ground) of the Prestige.
Step 2. Connecting the SDSL Line
Connect the Prestige (RJ-11 port labeled SDSL) directly to the telephone jack using the SDSL cable
(included).
Step 3. Connecting the Console Port
For the initial configuration of your Prestige, you need to use terminal emulator software on a workstation
and connect it to the Prestige through the console port. Connect the 9-pin end of the console cable (9-pin to
25-pin console cable supplied) to the console port of the Prestige and the 25-pin end to a serial port (COM1,
COM2 or other COM port) of your workstation. You can use an extension RS-232 cable if the enclosed
one is too short.
2-2
Prestige 681 Rear Panel Connections
Installation & Setup