Table 11-3 System Maintenance Menu Syslog Parameters - ZyXEL Communications Prestige 681 User Manual

Table 11-3
Parameter Description
UNIX Syslog:
Active Use the [SPACE BAR] to turn on or off syslog.
Syslog IP Address Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Log Facility
Use the [SPACE BAR] to toggle between the 7 different Local options. The log
facility allows you to log the message to different files in the server. Please refer to
your UNIX manual for more detail.
Types:
CDR Call Detail Record (CDR) logs all data phone line activity if set to Yes.
Packet triggered The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to Yes.
Filter log No filters are logged when this field is set to No. Filters with the individual filter Log
Filter field set to Yes are logged when this field is set to Yes.
PPP log PPP events are logged when this field is set to Yes.
Your Prestige sends four types of syslog messages. Some examples (not P681 specific) of these syslog
messages with their message formats are shown next:
1. CDR
CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
L02
C02 OutCall Connected xxxx (means connected speed) xxxxx (means Remote Call Number)
L02 Call Terminated
C02 Call Terminated
System Maintenance
Prestige 681 SDSL Router
System Maintenance Menu Syslog Parameters
Tunnel Connected(L2TP)
11-7