Figure 11-3 System Information And Console Port Speed; Table 11-1 System Maintenance - Status Menu Fields - ZyXEL Communications Prestige 681 User Manual

Table 11-1
Field
NodeName
Status
TXPkts
RXPkts
Errors
Tx B/s
Rx B/s
Up Time
Ethernet
Status
Tx Pkts
Rx Pkts
Collision
WAN
Line Status
Transfer Rate
CPU Load
Press Command
1 - Reset Counters
2 – Reset SDSL
ESC - Exit
Menu 24.2 System Information and Console Port Speed is as follows.
Figure 11-3
Press 1 to display the next screen, Menu 24.2.1 - System Maintenance - Information.
System Maintenance
System Maintenance - Status Menu Fields
Description
This is the remote node name that you determined in Menu 11.1.
Shows the status of the remote node – either Up or N/A.
The number of packets transmitted to this remote node.
The number of packets received from this remote node.
The number of error packets on this connection.
Shows the transmission rate in bytes per second.
Shows the receiving rate in bytes per second.
Time this channel has been connected to the remote node.
Shows the current status of the LAN.
The number of transmitted packets to the LAN.
The number of received packets from the LAN.
Number of collisions.
Shows the current status of the SDSL line, which can be
Synchronizing, or Normal.
Shows the SDSL line speed.
Specifies the percentage of CPU utilization. When the data rate is
over 1MB, excessive CPU loading degrades performance.
Press 1 to reset all the above statistics to 0.
Press 2 to reset the SDSL connection.
Press ESC to go back to Menu 24.
Menu 24.2 - System Information and Console Port Speed
1. System Information
2. Console Port Speed
System Information and Console Port Speed
Prestige 681 SDSL Router
11-3