Table of Contents
Advertisement
Prestige 681 SDSL Router
The next table describes the IPX Filter Rule.
Field
IPX Packet Type
Destination/Source Network
#
Destination/Source Node #
Destination/Source Socket #
Destination/Source Socket #
Comp
Operation
Once you have completed filling in Menu 21.1.3 - IPX Filter Rule, press [ENTER] at the
message [Press ENTER to Confirm] to save your configuration, or press [Esc] to cancel. This
data will now be displayed on Menu 21.1 - Filter Rules Summary.
9-14
Table 9-7
IPX Filter Rule Menu Fields
Description
Enter the IPX packet type (1-byte in hexadecimal) you wish to
filter.
The popular types are (in hexadecimal):
01 - RIP
04 - SAP
05 - SPX (Sequenced Packet eXchange)
11 - NCP (NetWare Core Protocol)
14 - Novell NetBIOS
Enter the destination/source network numbers (4-byte in
hexadecimal) of the packet that you wish to filter.
Enter in the destination/source node number (6-byte in
hexadecimal) of the packet you wish to filter.
Enter the destination/source socket number (2-byte in
hexadecimal) of the packets that you wish to filter.
Select the comparison you wish to apply to the
destination/source socket in the packet against that specified
above.
This field is applicable only if one of the Socket # fields is
0452 or 0453 indicating SAP and RIP packets. There are
seven options for this field that specify the type of the packet.
l
None.
l
RIP Request.
l
RIP Response.
l
SAP Request.
l
SAP Response.
l
SAP Get Nearest Server Request.
l
SAP Get Nearest Server Response
Filter Configuration
Advertisement
Table of Contents
