Copying Onto Custom Size Paper From The Multi Bypass Tray (Tray 7) - Ricoh Pro 8100s User Manual

3. Copy
Copying onto Custom Size Paper from the
Multi Bypass Tray (Tray 7)
Paper that has a horizontal length of 139.7–487.7 mm (5.50–19.20 inches) and a vertical length of
100.0–330.2 mm (3.94–13.00 inches) can be fed in from the multi bypass tray (Tray 7). Note
however that the limitation on the horizontal and vertical length range will vary depending on which
options are installed.
• When prints are delivered to the shift tray of the finisher or the stacker tray:
Horizontal length: 139.7–487.7 mm (5.50–19.20 inches), vertical length: 139.7–330.2 mm
(5.50–13.00 inches)
1. Load the paper face up in the multi bypass tray (Tray 7).
2. Press [Tray 7].
3. Press [Paper Size].
4. Press [Program Custom Size].
5. Enter the horizontal size with the number keys, and then press [ ].
6. Enter the vertical size with the number keys, and then press [ ].
7. Press [OK] twice.
8. Place the originals, and then press the [Start] key.
64