[Startup Logo]; [Auto Setup Setting]; [Signal Search] - Panasonic PT-VZ585N Operating Instructions Manual

3) Press as to select [SCREEN FORMAT].
4) Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
Model No.
PT-VZ585N
PT-VW545N
PT-VX615N
5) Press as to select [SCREEN POSITION].
f In the following cases, the [SCREEN POSITION] cannot be set.
g For PT-VZ585N and PT-VW545N, if [SCREEN FORMAT] is set to [16:10].
g For PT-VX615N, if [SCREEN FORMAT] is set to [4:3].
6) Press qw to set the screen position.

[STARTUP LOGO]

Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT LOGO]
[USER LOGO]
[OFF]
Note
f The startup logo will disappear in approximately 30 seconds.
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.

[AUTO SETUP SETTING]

Set the automatic execution of AUTO SETUP.
Dot clock, clock phase and image position can be adjusted automatically without pressing the <AUTO SETUP/
CANCEL> button each time when unregistered signals are input frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[BUTTON]

[SIGNAL SEARCH]

Set to enable/disable the signal search function.
If the signal search function is enabled, the input with input signal is automatically selected when the power is
turned on and the projection is started. In addition, if the <AUTO SETUP/CANCEL> button is pressed when the
currently selected input has no signal, it automatically switches to the input with input signal.
1) Press as to select [SIGNAL SEARCH].
2) Press qw to switch the item.
Chapter 4 Settings - [DISPLAY OPTION] menu
[SCREEN FORMAT]
[16:10]
[16:9]
[4:3]
[4:3]
[16:10]
[16:9]
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
If the image being projected changes to an unregistered signal, the auto setup is automatically performed.
Enables the auto setup function only when the <AUTO SETUP/CANCEL> button is pressed.
The available items to set when [SCREEN POSITION] is
selected
Cannot be set.
Three items of [CENTER], [UPPER] and [LOWER] can be
selected for vertical position.
Three items of [CENTER], [LEFT] and [RIGHT] can be selected
for horizontal position.
Cannot be set.
Three items of [CENTER], [UPPER] and [LOWER] can be
selected for vertical position.
ENGLISH - 83