Panasonic PT-VZ585N Operating Instructions Manual page 114

Example of connection for image transfer
Connection image
Input
MIRRORING
Communication
IEEE802.11n
method
Connection method WPS + Wi-Fi Direct
Image transmission
Miracast
method
Projector settings
1) Turn on the power of the projector.
2) Select the [NETWORK/USB] menu → [WIRELESS LAN] from the main menu, and set it to other than
[DISABLE].
3) Press the <ENTER> button.
f The [WIRELESS DETAILED SETUP] screen is displayed.
4) Perform the connection setting.
f For details, refer to "[WIRELESS LAN]". (
Note
f Wireless LAN and wired LAN cannot be used in the same segment.
f When multiple devices are connected, a unique IP ADDRESS must be allocated to each device.
f Do not use ANY connection by setting "any" or "ANY" character string in SSID.
f The projector settings are not required when connecting Miracast compatible devices to the projector via MIRRORING. For details about
connecting with the MIRRORING function, refer to "Projecting with MIRRORING" (
114 - ENGLISH
Chapter 5 Operation of Function - Network connection
Miracast
(Example) Content display
Projector
Miracast
Miracast compatible devices
Æ
page 100)
Image transfer application software
(Example) Multi-screen display
Projector
Devices such as a computer that are installed with the
image transfer application software
Panasonic APPLICATION
IEEE802.11a/b/g/n
Panasonic proprietary + User connections
Panasonic proprietary
Æ
page 136).