[Panasonic Application] - Panasonic PT-VZ585N Operating Instructions Manual

3) Press as to select an item and press qw to change the setting.
[WEB CONTROL]
[PJLink CONTROL]
[COMMAND CONTROL]
[COMMAND PORT]
[Crestron Connected(TM)]
[AMX D. D.]
[EXTRON XTP]
4) Press as to select [OK] and press the <ENTER> button.

[Panasonic APPLICATION]

Configure the settings of the functions used when devices such as a computer are connected to the projector via
LAN with Panasonic's application software.
Setting [MODERATOR MODE]
When connecting multiple devices to the projector with Panasonic's image transfer application software, you can
set whether to enable the [MODERATOR MODE] to allow the moderator to designate the presenter.
1) Press as to select [Panasonic APPLICATION].
2) Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3) Press as to select the [MODERATOR MODE].
4) Press qw to switch the item.
f The item will switch each time you press the button.
[OFF]
[ON]
Note
f When set to [ON], images cannot be interrupted by other users.
f About the operating methods of MODERATOR MODE for Panasonic APPLICATION input, refer to "Projecting with Panasonic APPLICATION "
133
Æ
( page ).
f The image transfer application software that support Panasonic APPLICATION input are as follows.
g Wireless Manager
g Plug and Share
g Wireless Projector for iOS or Wireless Projector for Android
f "Wireless Manager ME6.4" is included in the supplied CD-ROM.
f For the using method of the image transfer application software "Plug and Share", which allows easy wireless connection by pairing the
commercially available USB memory with the projector, refer to the Operating Instructions of "Plug and Share" included in the supplied CD-
ROM. For the pairing between the projector and the USB memory, refer to "Using the Pairing function" (x page 147). The pairing process
is to write the image transfer application software "Plug and Share" and the connection information between the projector and the USB
memory to the USB memory.
f For details of "Wireless Projector", refer to the following URL.
https://panasonic.net/cns/projector/
104 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
Set to [ON] to control with the web browser.
Set to [ON] to control with the PJLink protocol.
Set to [ON] to control with the <SERIAL IN> terminal control command format (x page 168). Refer
to "Control commands via LAN" (x page 163).
Set the port number used for command control.
Set to [ON] to control with Crestron Connected
Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through "AMX Device Discovery". For details, visit the
website of AMX Corporation.
URL http://www.amx.com/
Set to [ON] when connecting the "XTP transmitter" of Extron Electronics to the <DIGITAL LINK/LAN>
terminal.
The [EXTRON XTP] setting must be set to [OFF] when connecting the optional DIGITAL LINK output
supported device (Model No.: ET-YFB100G, ET-YFB200G).
For details of the "XTP transmitter", visit the website of Extron Electronics.
URL http://www.extron.com/
Disables [MODERATOR MODE].
Select when you want each device user to control whether to display in full screen.
Enables [MODERATOR MODE].
Select when the moderator operates the projector and designates the image to be displayed in full
screen from the screens of multiple devices displayed in thumbnail.
of Crestron Electronics, Inc.
TM