[RGB-SYSTEM]
(Only for analog RGB signal input)
The projector automatically detects the input signal, but the images may not be displayed properly depending on the
input signal. In that case, select the item according to the input signal.
1)
Press as to select [RGB-SYSTEM].
2)
Press the <ENTER> button.
f The [RGB-SYSTEM] screen is displayed.
3)
Press as to select the signal and press the <ENTER> button.
f The selectable items differ depending on the input signal.
Items
[1280x768/60]
[1366x768/60]
[1400x1050/60]
[1680x1050/60]
[1440x900/50]
[1600x900/50]
[1440x900/60]
[1600x900/60]
Note
f It may not work properly for some connected external devices.
Chapter 4 Settings - [PICTURE] menu
Resolution (dots)
Horizontal (kHz)
1 280 x 768
1 366 x 768
1 400 x 1 050
1 680 x 1 050
1 440 x 900
1 600 x 900
1 440 x 900
1 600 x 900
Scanning frequency
Vertical (Hz)
47.7
60.0
47.7
60.0
65.2
60.0
65.2
60.0
46.3
50.0
46.3
50.0
55.9
60.0
55.9
60.0
Dot clock frequency
(MHz)
80.1
84.7
122.6
147.1
87.4
97.0
106.5
119.0
ENGLISH - 69