[Audio Setting]; [Off] - Panasonic PT-VZ585N Operating Instructions Manual

[AUDIO SETTING]

You can perform detailed audio setting.
Adjusting the volume
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [VOLUME].
4) Press qw to adjust the level.
Operation
Press the w button.
Press the q button.
Setting the mute status
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [MUTE].
4) Press qw to switch the item.

[OFF]

[ON]
Setting the audio output during standby
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [IN STANDBY MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], audio cannot be output during
standby.
f When [IN STANDBY MODE] is set to [ON], you can adjust the volume with the <VOL-> button / <VOL+> button on the remote control or the
qw buttons on the control panel during standby.
Setting the audio input from the connected device
Choose the audio input terminal for each input signal.
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select the items of [AUDIO IN SELECT] to set.
[COMPUTER1]
[COMPUTER2]
92 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Adjustment
Increases the volume.
Decreases the volume.
Audio is output.
Audio is muted.
Disables audio output in the standby mode.
Enables audio output in the standby mode.
Set the audio output for COMPUTER1 input.
Set the audio output for COMPUTER2 input.
Range
0 ~ +63