Table of Contents
Advertisement
Note
f For the menu items that are displayed when [SIMPLE] is set, refer to "Main menu" (x page 97), "Sub-menu" (x page 98).
[BACK COLOR]
Set the display of the screen when a signal is not input.
1)
Press as to select [BACK COLOR].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[BLUE]
[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f The [BACK COLOR] setting item is common with the following menu item.
g The [PROJECTOR SETUP] menu → [NO SIGNAL SETTING] → [BACK COLOR]
f To create and register the [USER LOGO] image, use "Logo Transfer Software". The software can be downloaded from the website (https://
prosystem.panasonic.cn/ProjectorDownload).
When transferring logos via the optional DIGITAL LINK output supported device (Model No.: ET-YFB100C), setting for "NO SIGNAL SLEEP"
of the DIGITAL LINK output supported device should be set to "OFF" to avoid interruption of communication.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1)
Press as to select [STARTUP LOGO].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT LOGO]
[USER LOGO]
[NONE]
Note
f When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.
f To create and register the [USER LOGO] image, use "Logo Transfer Software". The software can be downloaded from the website (https://
prosystem.panasonic.cn/ProjectorDownload).
When transferring logos via the optional DIGITAL LINK output supported device (Model No.: ET-YFB100C), setting for "NO SIGNAL SLEEP"
of the DIGITAL LINK output supported device should be set to "OFF" to avoid interruption of communication.
[UNIFORMITY]
Correct the brightness unevenness and color unevenness of the whole image.
Setting [GRADIENT CORRECTION]
Correction is performed in vertical and horizontal directions to approach the even condition when unevenness in
one direction is occurring throughout the whole image.
1)
Press as to select [UNIFORMITY].
2)
Press the <执行> button.
f The [UNIFORMITY] screen is displayed.
3)
Press as to select [WHITE], [RED], [GREEN], or [BLUE].
4)
Press qw to adjust the level.
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays blue in the entire screen.
Displays black in the entire screen.
Displays the Panasonic logo in the screen.
Displays the image registered by the user in the screen.
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
ENGLISH - 155
Advertisement
Table of Contents
