Panasonic PT-VZ585N Operating Instructions Manual page 128

Example of E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Type
Serial No
-----
FAN
INTAKE AIR TEMPERATURE
EXHAUST AIR TEMPERATURE
LAMP REMAIN TIME
LAMP STATUS
APERTURE (CONTRAST-SHUTTER)
AIR FILTER
(Error code 00 00 00 00 01 00 00 08)
Intake air temperature
Exhaust air temperature
PROJECTOR RUNTIME
LAMP
LAMP
LAMP
LAMP
-------- Current status ---------
MAIN VERSION
NETWORK VERSION
SUB VERSION
LAMP STATUS
INPUT
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
----- Wireless Network configuration -----
DHCP Client
IP address
MAC address
----- Memo -----
[Command port set up] page
Set the port number used for command control.
Click [Detailed set up] → [Command port set up].
1 [COMMAND PORT]
Set the port number used for command control.
128 - ENGLISH
Chapter 5 Operation of Function - Web control function
: PT-VZ585N
: SH1234567
check system -----
: 31 degC /
: 37 degC /
750 H
NORMAL 100 H
ECO1 420 H
ECO2 420 H
REMAIN 4250 H
1.00
1.00
1.00
LAMP=ON
RGB
OFF
192.168.10.100
04:20:9A:00:00:00
OFF
192.168.0.100
04:20:9A:00:00:00
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ FAILED ]
[ OK ]
[ OK ]
87 degF
98 degF
2 [Submit]
Update the settings.
1
2