Subnet Mask] - Panasonic PT-VZ585N Operating Instructions Manual

For [WIRED LAN]
1 [DHCP ON], [DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]
Enter the IP address when not using a DHCP server.

3 [SUBNET MASK]

Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]
Enter the default gateway address when not using a
DHCP server.
5 [DNS1]
Enter the DNS1 server address.
Permissible characters for the entry of DNS1 server
address (preferred):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
6 [DNS2]
Enter the DNS2 server address.
Permissible characters for the entry of DNS2 server
address (alternate):
Numbers (0 - 9), period (.)
(Example: 192.168.0.254)
Note
f When you use the "Back" and "Forward" functions of the browser, a warning message "Page has Expired" may appear. In that case, click
[Network config] again since the following operation will not be guaranteed.
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
For [SIMPLE] (WIRELESS LAN)
1 [KEY]
Set the key to be used in SIMPLE.
Enter 8 to 15 alphanumeric characters.
122 - ENGLISH
Chapter 5 Operation of Function - Web control function
1
2
3
4
5
6
7
8
7 [EAP]
Select the EAP configured on the RADIUS server.
8 [Back], [Next]
Click the [Back] button to return to the previous screen.
When [EAP] is set to other than [NONE], pressing [Next]
will move to the next page. When [EAP] is set to [NONE],
the setting confirmation screen will be displayed after
pressing the [Next] button. Click the [Submit] button to
update the setting.
9 [User name]
Enter the user name with alphanumeric characters
(excluding spaces, up to 64 characters) for authentication
purpose.
10 [Password]
Enter the password with alphanumeric characters (up to
64 characters) for authentication purpose.
11 [Back], [Next]
Click the [Back] button to return to the previous screen.
The setting confirmation screen is displayed by pressing
the [Next] button. Click the [Submit] button to update the
settings.
2 [Back], [Next]
Click the [Back] button to return to the previous screen.
The setting confirmation screen is displayed by pressing
the [Next] button. Click the [Submit] button to update the
settings.
9
10
11
1
2