Connecting With Wireless Lan - Panasonic PT-VZ585N Operating Instructions Manual

4) Perform the detailed setting of [WIRED LAN].
f For details, Refer to "[WIRED LAN]". (
Note
f To connect to an existing network, perform after consulting your network administrator.
r Factory default setting
f Following setting has been made as a factory default.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1] / [DNS2]
Operating the computer
1) Turn on the power of the computer.
2) Perform the network setting following the instruction of your network administrator.
f If the projector is in factory default setting, you can use it as it is if the network setting of the computer is as
follows.
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]

Connecting with Wireless LAN

Example of connection
Chapter 5 Operation of Function - Network connection
Æ
page 99).
[OFF]
192.168.10.100
255.255.255.0
192.168.10.1
(Blank)
192.168.10.101
255.255.255.0
192.168.10.1
IEEE802.11a/b/g/n
ENGLISH - 113