Auto-Configure; Ann-S/Pg (Print) Options Screen - Honeywell Fire-Lite Alarms MS-9050UD Manual

Programming

3.6.9.1.3 Auto-Configure

The ANN-BUS Auto-Configure features allows the programmer to quickly bring all installed
ANN-BUS modules online. The software will search for all ANN-BUS modules and
automatically program the device type and address into the system. The ANN-BUS must be
enabled for the Auto-Configure feature to work. Pressing 3 while viewing ANN-BUS Screen
#1 will begin the Auto-Configure process and cause the following screen to be displayed:

3.6.9.1.4 ANN-S/PG (Print) Options Screen

The Print option allows the programmer to configure the optional printer. Pressing 1 while
viewing ANN-BUS screen #2 will display the following screens:
Pressing 1 for Port while viewing ANN-S/PG Options screen #1 will allow the programmer to
select between a Parallel and Serial Port for printer connection. Each press of the 1 key will
cause the display to toggle between Port PAR (parallel) and Port SER (serial). It is important to
note that the interface selected determines which options are available to the user.
116
ANN-BUS
AUTO-CONGFIGURE
IN PROGRESS
PLEASE WAIT
Auto-Configure Screen
ANN-S/PG OPTIONS
1=PORT
2=PRINTER SUPV
3=OFFLINE TIMER
ANN-S/PG Options Screen #1
ANN-S/PG OPTIONS
1=BAUD RATE
2=DATA BITS
3=PARITY
ANN-S/PG Options Screen #2
ANN-S/PG OPTIONS
1=STOP BITS
ANN-S/PG Options Screen #3
PAR
NO
60
N/A
N/A
N/A
N/A
MS-9050UD PN 52413:C 01/23/08