ANN-RLY Options Screen
Pressing 2 for Module Options while viewing ANN-BUS Address Screen when the ANN-RLY
option is selected, will cause the following screen to be displayed:
The ANN-RLY module provides ten Form-C relays which can be programmed for various
functions. The initial screen displays Relays 1 through 3. Pressing the down arrow key will
display the remaining relays for this module.
To program any of the ANN-RLY relays, while viewing the appropriate ANN-RLY Option
screen, press the number key corresponding to the relay to be programmed. Following is a list
of the available programming options for each relay:
•
Alarm
•
Supervisory
•
Supervisory AR
•
Trouble
•
Comm Fail
•
Process Mon
•
Process Mon AR
•
AC Loss
•
Hazard
•
Medical
•
Silenceable Alarm
•
Zone Active XX (where XX = programmed zone 0 to 19)
MS-9050UD PN 52413:C 01/23/08
ANN-RLY - ADDR. #
1=RELAY 1
2=RELAY 2
3=RELAY 3
ANN-RLY Options Screen
Programming
ZONE 00
ZONE 01
ZONE 02
115