Nortel Passport 2430 Installing And Operating Instructions page 107

This appendix provides information and worksheets that aid you in responding to
the Quick-Start prompts that occur when you configure the Passport 2430 after
booting for the first time.
Topic
Understanding Quick-Start Connector Names and Numbers
Filling Out the Worksheets
Global Information Worksheet
Router Protocol Worksheets
WAN Protocol Worksheets
You can also configure additional interfaces using Quick-Start, but in most cases
your initial IP interface connects you to the management workstation, where you
can use Site Manager, BCC, or another management tool to fully customize your
router's configuration.
Fill out the worksheets with assistance from your network administrator. The
worksheets contain options that appear at each prompt when configuring a serial
interface, and space for you to enter your own information. If you are configuring
an interface other than the serial interface, the prompts will differ from those
shown in the sample worksheets. In that case, use the sample worksheets only as a
guide and review the actual Quick-Start prompts and options carefully before
replying.
Be sure to fill out the worksheets and read all sections of this appendix before you
run the Quick-Start script.
308224-B Rev 00
Quick-Start Worksheets
Appendix B
Page
B-2
B-2
B-3
B-5
B-11
B-1