Lexmark CX730 User Manual page 260

Troubleshoot a problem
Error codes
31.64
31.80
32.40, 32.41, 32.42, 32.43
32.60
32.64
33.40, 33.41, 33.42, 33.43
33.60
33.64
37.1
37.3
Error message
Reinstall missing,
unplugged, or unresponsive
color imaging kit.
Reinstall missing or
unresponsive fuser.
Replace unsupported [color]
cartridge.
Replace unsupported black
imaging unit.
Replace unsupported color
imaging kit.
Non-Lexmark [color]
cartridge, seeUser's Guide.
Non-Lexmark black imaging
unit, seeUser's Guide.
Non-Lexmark color imaging
kit, see User's Guide.
Insufficient memory to
collate job.
Insufficient memory, some
held jobs were deleted.
Solution
1
Open door B.
2
Remove the waste toner bottle.
Note: To avoid spilling the toner,
place the bottle in an upright
position.
3
Remove the cartridges.
4
Disconnect the imaging kit cable.
5
Remove the imaging kit.
6
Insert the imaging kit.
7
Connect the imaging kit cable.
8
Insert the cartridges.
9
Insert the waste toner bottle.
10
Close door B.
1
Open door A, and then open
door A1.
2
Remove the fuser.
3
Insert the fuser.
4
Close door A1, and then close
door A.
See "Replacing a toner cartridge" on
page 204.
See "Replacing the black imaging
unit" on page 207.
See "Replacing the color imaging kit"
on page 216.
See "Non‑Lexmark supply" on
page 307.
Try one or more of the following:
•
Touch Continue to print the part
of the job that is stored and to
begin collating the rest of the print
job.
•
Cancel the current print job.
Touch Continue to clear the message
and continue printing.
260