Lexmark CX730 User Manual page 148

Use printer menus
Menu item
Digits to Mask
0–58 (0*)
Enable Line Connected
Detection
Off
On*
Enable Line In Wrong Jack
Detection
Off
On*
Enable Extension in Use
Support
Off
On*
Optimize Fax Compatibility
Fax Transport
T.38
Analog
G.711
etherFAX
Note: An asterisk (*) next to a value indicates the factory default setting.
HTTPS Fax Settings
Note: This menu appears only if Fax Transport is set to etherFAX.
Menu item
HTTPS service URL
HTTPS Proxy
HTTPS Proxy User
HTTPS Proxy Password
Fax Send Encryption
Disabled
Enabled*
Required
Fax Receive Encryption
Disabled
Enabled*
Required
HTTPS Fax Status
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the number of digits to mask in an outgoing fax number.
Determine whether a telephone line is connected to the printer.
Note: Events are detected immediately.
Determine whether a telephone line is connected to the correct port on the
printer.
Note: Events are detected immediately.
Determine whether a telephone line is used by another device, such as another
phone on the same line.
Note: Events are detected immediately.
Configure the printer fax functionality for optimal compatibility with other fax
machines.
Set the fax transport method.
Note: This menu item appears only if an etherFAX or Fax over IP (FoIP) license
bundle is installed in the printer.
Description
Specify the etherFAX service URL.
Specify a proxy server URL.
Specify the user name and password for the proxy server.
Enable encryption for outgoing fax messages.
Enable encryption for incoming fax messages.
Show the etherFAX communication status.
148